IH Fan, I also have a 300 Utility with 3 remote valves and factory PS. My PS lines come off the back of the regulater/flow divider. This is the part you still have mounted on the tractor in your picture. Then mine has a pipe that comes off the flow/divider and goes to the side of 3rd rear valve and the outside of the two front valves. My factory U34 loader is connected to the bottom ports on the 2 front valves. One port is single acting for the loader cylinders and the other front port is double acting for the bucket. My 3rd valve is used for the fast-hitch.
Attached are a few pictures I took a long time ago for another person who wanted to do the same hook-up. The might give you some idea as this is a completely factory setup. I could take some better pictures if that would help you.
My 1st picture is the rear flow divider with lines to the PS. The 2nd picture is the pipe from the flow divider to 3rd valve and then to front valves. Last picture shows the front valves. Al
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
