Re: WD 45 Allis Chalmers/ Stuck in gear
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk ]
Posted by Bill on July 02, 1998 at 17:51:12:
In Reply to: WD 45 Allis Chalmers/ Stuck in gear posted by Verne Garrison on July 02, 1998 at 15:55:38:
: How do I line up the "forks" to get back in nuetral?
: Someone told me that the gear selectors on the forks will look like a box or a square when lined up in nuetral. This is straight gearshift model 45 (i.e. not curved).
: I have removed the retaining ring and pulled out the pivot pine (shaft) and look down into top of the gear box and can see the selectors but the forks are below this so must line up the little "square" selectors??? I guess....
: I am locked and can't move till I get it in nuetral.
: Help please....Verne Garrison, Illinois Verne: Take a screwdriver and move the forks,gears, what ever you can patiently until the trans is in neutral. Take your time and you can do it. I have had this happen every once in a while on a WD, and WD45. Good luck, Bill
Follow Ups:
Post a Followup
|
