Of course, everybody does but you dont seem interested in solving the problem. You are like a cat playing with a mouse rather than killing it. Thats fine, if you have nothing else to do and "fixing" a simple carb for weeks/months at a time is a hobby for you, have at it. But it is in fact a simple fix and many people have told you how already.
For the carbon issue, use water injection. Its been done for a hundred years now (maybe more). Or take it apart and clean it. Its a simple job, dont make it more than what it is...
If your carb is running rich, on an engine that is notorious for being lean from the factory, then I will bet dimes to doughnuts that one of the previous owners was in that carb jacking around with things. A guy can do a lot of damage to a carb with torch tip cleaner, and you can end up trying to "fix" his mistakes by mixing your own gas for years. Thats cool if you need a hobby but not so much if you want to accomplish something. If you want it fixed, replace the jets, they are clearly opened up if you are running rich on a lean running engine. It will cost you about $4 and 45 minutes of your time. If that dont fix things (it will though), replace the carb. New carbs are available on Ebay for $20-50. Buy one with adjustable jets. Or dont and post for the next 3 year how you got duped into buying a new carb that is worthless and now you are mixing special gas just for you Kohler engine.
But like I said, I dont think you want this fixed, I think you want to play around trying to find a longer, harder version of tried and true solutions. Because of that, the best we can do is wish you luck and encourage you to have fun because even if someone offeres to mail you a perfect fix, maybe a new carb, you wouldnt accept it (it has happened in other threads you started). So have fun and good luck.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Product Review: Black Tire Paint - by Staff. I have been fortunate in that two of my tractors have had rear tires that were in great shape when I bought the tractor. My model "H" even had the old style fronts with plenty of tread. My "L" fronts were mismatched Sears Guardsman snow tires, which I promptly tossed. Well, although these tires were in good shape as far as tread was concerned, they looked real sad. All were flat, but new tubes fixed that. In addition to years and years of scuffing and fading, they had paint splattered on
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
