Posted by Bill VA on November 07, 2015 at 16:27:08 from (45.52.131.122):
Enjoying some window shopping with respect to a couple of tractors. On the front burner at the moment is a Farmall 400 and in as much as they are so similar, the 450 too.
Looking at the 400, there appears to be no draft control. The 450 looks like it has it via a big cylinder running beneath the tractor? That cylinder looks like something to be high centered or worse - knocked off on a rock!
I've plowed some with my old MF50 and the draft control works great. You can almost see the plow moving up and down a tad as you plow.
My Wife's father grandfather farmed with a Farmall H and later a Super H - which I gather, neither had draft control.
Question - when you're plowing with a tractor without draft control, are you simply muscling through the ground, hit a tough spot the tractor pulls down, spins or worse flips over backwards!
Or were there provisions on these tractors and/or plows to account for draft?
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Restoration Story: Fordson Major - by Anthony West. George bought his Fordson Major from a an implement sale about 18 years ago for £200.00 (UK). There is no known history regarding its origins or what service it had done, but the following work was undertaken alone to bring it up to show standard. From the engine number, it was found that this Major was produced late 1946. It was almost complete but had various parts that would definitely need replacing.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
