Posted by Trobb55 on August 30, 2020 at 20:30:53 from (184.53.33.122):
Hello!
I have a Case 1740 Uniloader. Just bought it last year, have made some repairs, and overall it is a nice machine. But, unfortunately, it is an old machine, and thus I find myself not able to find some parts I am in need of. The machines brakes no longer seem to work. I was unaware of this when the machine was bought, and found out the hard way. Living in Western Pennsylvania, I find myself needing to constantly do work on a hill. Not being an Operator, nor do I run, or have I ran, a skid steer professionally, I find it to be a rather big issue. I have the parts numbers, but being an old machine from the 1970s to 1980s, these parts are no longer used, or produced by Case. And, there seems to be little to no aftermarket marketplace for these parts. If I have been able to find these parts, they are used, which is fine, but for some reason(s) they are unavailable or "out-of-stock." The brake system is hydraulic. Master cylinder, was dry, had no brake fluid in it. Seems to hold it just fine after filling it up. Once I bled the air from the lines. It sounded like the brakes would work on the left side, but not the right. When operating the machine shortly after this, the brakes still seem not to work.
I am stuck. Can't get the parts I'm looking for. And, don't know what to try, or where to look now.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - On the Road with Dave Gohl: Auction Musings - by Dave Gohl. I was thinking the other day about all the auctions I've been to in the last few years. There've been many. Some have been very good, some have been well, disappointing to say the least. But no matter how good or bad auctions may be, we always seem to stay until the item we've come for or are interested in is on the block. I've been to some auctions near and far. I think the furthest has been the Two Cylinder 7 in the Amana Colonies last year. Lots of stuff, lots of people. I've also atten
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
