|
Tractor Talk Discussion Board |
Fibreglass Repair ... I have a question.
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Alberta Mike on April 07, 2002 at 15:03:10 from (209.47.89.128):
I'm repairing a fibreglass engine cover for a friend of mine. Something fell on it and gave it a pretty good bash. The repair area isn't too big but the housing is smashed with a lot of that fibrestrand stuff sticking out of the worst part, and some cracking away from that area. I've worked with fibreglass before and what I want to do is start on the inside with a patch of mat and resin, then later move to the outside, get rid of some of the loose stuff, and then lay in mat and resin in successive layers. Finally, I'll use a little surface filler (Bondo) and finish it up. My questions are: (1) Am I going about this correctly? (2) Should I be using the woven mat or the random-strand mat? I was thinking maybe the woven mat on the inside for maximum strength, then the random-strand stuff on the outside since I find it a bit more forgiving to work with.
Follow Ups:
Home
| Forums
Today's Featured Article -
12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
