|
Tractor Talk Discussion Board |
Re: Re: Looking for older tractor to do these thin
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tom Williams III on October 07, 2003 at 07:58:46 from (66.150.60.2):
In Reply to: Re: Looking for older tractor to do these things posted by Jim Handke on October 07, 2003 at 07:32:58:
No, Jim. Actually that is a lot of help. For the wieght factor on the front end parts and bearings and all are something I didn't even consider at all. That takes care of one aspect, which is the Farm Pro and other associated group of 20 to 30 horsepower tractors.
So, I am now more in focus on an older or antique tractor of 50 or so horsepower to do the probably 100 or less hours a year of real work I will be doing.
Any ideas on what kind of tractor. Would an 8N be too light for this?? At this point I don't yet have any brand loyalty or anything to tie me to a make.
Any ideas or recommendations would be most welcome.
And thank you, I do appreciate it.
Tom
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
