Re: Honda HT3813 Valve Timing Help

Posted by PaulG1 on May 22, 2005 at 17:38:00 from (64.57.108.26):

In Reply to: Re: Honda HT3813 Valve Timing Help posted by Bern S on May 22, 2005 at 01:07:34:

Bern S,

I found the cam pully "T" mark and the diamond below. All I could find is a "T" mark on the flywheel but not a diamond on the block to allign it to.

Is there any reference to the "T" mark on the flywheel and a location it can be alligned to - I was hoping I wouldn't need to remove the flywheel to see the diamond on the crank shaft because that will take about another 5 hours (burried deep in the mower!)

Thanks for all your help.

Paul

Follow Ups:

• Re: Honda HT3813 Valve Timing Help Bern S 21:53:19 05/22/05 (1)
  • Re: Honda HT3813 Valve Timing Help PaulG1 12:40:12 05/23/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]