|
Tractor Talk Discussion Board |
Allis Chalmers I600
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by timsrv on April 08, 2006 at 10:08:30 from (67.164.59.114):
Hello, I am new here, so please forgive me if I don't do this right. I just purchased a 1968 Allis Chalmers I600 with a front loader and a backhoe attachment. It's got a deisel engine that runs well & everything works great except the clutch slips when trying to scoop up dirt with the front loader bucket. I am an RV technician by trade & run my own repair service, but everything on this unit is completely foriegn to me. I do have a service manual and from what I can see, I think the problem is in the shuttle clutch. The clutch feels good in reverse (although I haven't tried it with a heavy load), but the handle feels a bit "funky" when in the forward position. I see in the manual there is a way to adjust the clutch with shims. Has anyone else here encountered this? Am I on the right track? Any helpful suggestions would be greatly appreciated. Thank you. Tim
Replies:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
