Meyer Snowplow Icing Up

Posted by in-too-deep on February 06, 2007 at 14:03:17 from (64.40.78.202):

Meyer E47 Hydraulic Plow has just about got me beat. After several minutes of operation, after the oil is nice and warm, the plow stops operating. It won't go up or angle left or right. Just stops. I go back to the shop, point a halogen shop light at it, let it warm up and then it works fine. I use only the very expensive Meyer oil, that supposedly has de-icer in it. It is bitterly cold as you guys know, so could the oil still be icing up? That doesn't make sense because the pump is in use and gets warm. I'm getting really frustrated because I still haven't finished plowing and it's quitting time. I hope someone can help. Thanks folks.

Replies:

• Re: Meyer Snowplow Icing Up in-too-deep 08:56:18 02/07/07 (0)
• Re: Meyer Snowplow Icing Up Germ 19:25:20 02/06/07 (0)
• Re: Meyer Snowplow Icing Up bradhow in NE 19:25:20 02/06/07 (0)
• Re: Meyer Snowplow Icing Up the tractor vet 18:18:47 02/06/07 (0)
• Re: Meyer Snowplow Icing Up RWK in WI 17:09:58 02/06/07 (0)
• Re: Meyer Snowplow Icing Up tinyy 17:06:47 02/06/07 (0)
• Re: Meyer Snowplow Icing Up Harold Hubbard 15:53:50 02/06/07 (2)
  • Re: Meyer Snowplow Icing Up in-too-deep 16:24:33 02/06/07 (1)
    • Re: Meyer Snowplow Icing Up Ken Macfarlane 07:06:24 02/07/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]