Re: welding oil pans

Posted by Ed on June 08, 2002 at 15:41:49 from (142.154.16.118):

In Reply to: welding oil pans posted by Will@ont.ca on June 08, 2002 at 15:00:18:

I've welded lots of oil pans for stock car engines using 1/16th welding rods, not bronze. We would cut the bottom out of the pan and deepen it by welding in the bottom of another pan. I think the trick is to heat the whole area, not just the area being welded, and let it cool slowly. We also relieved any stress with a body hammer and dolly.

Follow Ups:

• Re: Re: welding oil pans Will@ont.ca 00:52:44 06/09/02 (1)
  • Re: Re: Re: welding oil pans Chicken George 05:44:15 06/09/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: welding oil pans Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]