Farmall H - PTO problem

Posted by stephen on June 28, 2002 at 18:38:26 from (152.163.195.203):

Just bought an H with loader and woods mower. After mowing with it several times, the PTO wouldn't run under load. I pulled out the PTO shaft. I'm not up on the terminology and I don't have a manual, but the two parts that engage near the steering column area both seem to be highly worn. I assume I have to replace both ends. What would I have to do to replace the front part? Is there a quick fix? It looked like someone may have done some welding on the shaft already, but I'm not sure. Any help would be appreciated.

Follow Ups:

• Re: Farmall H - PTO problem Haas 06:57:27 06/29/02 (0)
• Re: Farmall H - PTO problem Jeff 20:47:39 06/28/02 (2)
  • Re: Re: Farmall H - PTO problem stephen 13:16:43 06/29/02 (1)
    • Re: Re: Re: Farmall H - PTO problem Jeff 18:38:43 06/29/02 (0)
• Re: Farmall H - PTO problem joe 18:47:24 06/28/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Farmall H - PTO problem Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]