|
Farmall & IHC Tractors Discussion Board |
Roosa Master problems
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by George on October 08, 2002 at 17:21:07 from (208.42.12.35):
I have a 560 that I'm having injector pump problems with. There is no fuel coming out of the lines where they enter the injectors. I've removed all the lines at the injectors and turned the engine over. I've even followed the advice on this group and pulled the tractor a few hundred yards with no luck to get the fuel to flow. I've switched to another pump removed from a junk tractor, but still no luck. I'm guessing these pumps need to be rebuilt? Can anyone offer advice on rebuilding a pump? I would like to do it myself. I've rebuilt most everything on my tractors from the engine to the tranny, so I'm not a novice in the shop with tools. Thanks.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: How to Remove a Broken Bolt - by Staff. Another neat discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "I have an aluminum steering gear housing with a bolt broken off in it. The bolt is about a 3/8" x 1 1/2" bolt. I've already drilled the center of the bolt out with about 7/64" drill bit the entire length of the bolt. Only one end of the bolt is visible. I tried to use an easy out but it wasn't budging and I didn't want t
... [Read Article]
Latest Ad:
2022 John Deere 5045E, 4wd, front end loader and 3rd function with grapple. 120 hrs, 55k new, must sell
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
