What would you do? SA oil pump...

Posted by scott#2 on October 07, 2005 at 13:33:22 from (138.88.106.76):

I have this thing in pieces on the bench. Looking at the gear side of the cover plate, I am holding a precision Starrett square on edge across the face. The only light I see is where the gears have milled a .001 - .003 semi circle (load side) into the face of the cover. I can't see or rock with the square, any warpage. This thing had half scale oil pressure when I got it but I never worked it hard like the other SA which drops to probably 10 psi or less at full throttle when I plowed deep with it last year. (suspect it's warped and needs attention)

Would you put it back together and go on? Or would you lap the cover back down to true flat?

Thank You,

scott#2

Follow Ups:

• Re: What would you do? SA oil pump... scott#2 10:28:06 10/08/05 (0)
• Re: What would you do? SA oil pump... El Toro 16:38:17 10/07/05 (0)
• Re: What would you do? SA oil pump... MagMan 15:29:42 10/07/05 (1)
  • Re: What would you do? SA oil pump... Janicholson 15:46:02 10/07/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]