Re: Farmall M Starter

Posted by PFH1 on July 29, 2007 at 16:52:43 from (69.47.92.253):

In Reply to: Re: Farmall M Starter posted by John T on July 29, 2007 at 16:10:41:

John,Thanks,After I posted I was looking at the old and new starter. I noticed that the starter drive depths were different. The old starter is shimmed at the nose bearing about a 1/4in difference in depth. I am looking at the tips of the starter drive and I am wondering if they may have engaged the flywheel just a little corkscrewing the spring. I am not sure but I am going to get another starter drive and try to shim it down, It also appears that the new starter shaft my be shorter itself which may present another concern.....

Replies:

• Re: Farmall M Starter Owen Aaland 03:22:50 07/30/07 (1)
  • Re: Farmall M Starter PFH1 18:15:35 08/04/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]