Posted by FordsonMajorPat on August 02, 2008 at 05:08:33 from (74.36.201.239):
I have a TD-9 (WD-9) with the newer 350 series engine. The injectors are bad and the local diesel shop wants $150 apiece for new units, as my sphincter squeaks when I walk I will probably not be purchasing new ones. Can anyone get me info on rebuilding these things, maybe a shop manual? My manuals for the older Fords give fairly detailed instructions on checking, lapping, and rebuilding their units but I cant find any info for the IH units. These units have the short nozzles in the housing, the little info I got from someone is the cracking pressure should be 690 to 710 psi and no leaking below 400psi. (I have a bench tester for checking the pressure). When I checked them the first time they looked like crap, I took them apart and lapped the stem and seat with valve lapping compound, probably to coarse, but after reassembling them they actually sealed up to 400psi fairly well and had a little bit of a pop to them when they cracked, but the spray pattern looks kinda crapy to me. If anyone could get me some info or send me in the rite direction it would be greatly appreciated.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
