Tractor Talk Discussion Board |
IH 966 CHARGING SYSTEM
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Ryan Hansen on December 11, 2005 at 06:51:16 from (71.34.179.173):
I have a IH 966 with a ac delco altenator on on it but it is not charging. I took the altenator to a local parts store and they said it is ok. I traced all the wires back they all look in good shape. Does any body know the correct way it should be wire up at the altenator and where these wires should go. It has the battery, 2 plug, and ground on it for connections. I have looked at other tractors but every one seems to be wired up differently. Is there a way to checked it at the altnator itself while running on the tractor? What size of pulley should be on it it might not be getting enough rpms? Does this tractor have a internal or external regulator becuase under the steering wheel there is a black box that looks like one and if so is there a way to check this?
Replies:
Home
| Forums
Today's Featured Article -
The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|