|
Tractor Talk Discussion Board |
Re: Re: Re: PTO pump vibration problem
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by ltf in nc on October 04, 1999 at 17:57:09 from (206.228.213.216):
In Reply to: Re: Re: PTO pump vibration problem posted by Bob W on October 04, 1999 at 13:42:17:
Bob, can I assume that the supply line to the pump is about 1 1/2 times the diameter of the high pressure line that leaves the pump? If this is the case take the high pressure line loose at the control valve and temporarily route it back into the reservoir through the fill plug. Idle the engine with the PTO engaged and observe the vibration. Acknowledge your findings.
Follow Ups:
Post a Followup
|
