Farmall Tractors Discussion Board |
Another Touch Cortrol Question On '50 Super A
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by Merlin on September 01, 1999 at 17:52:32 from (208.231.100.203):
I searched the archives and came up with some good hints, but sure would like to get an opinion for my problem. I have noticed on My Super A for the last few months that when it was worked for a couple hours that it would just barely lift the disc. When it was cold right after start-up it worked fine. But today my friend was going to use it and the disc wouldn't come off the ground. It has a 3 point hitch with a 16 blade, 4' gang disc. It has had 30 wt. non detergent oil in it since it was new. I have bleed it according to the manual and it dosen't help. I guess I am grasping for straws before I get the courage to tear it down. I have learned more about my tractor in the last year on this board than I have in the previous 48 years I've owned it. By the way, the pump has never been torn down. Thanks everyone.
Follow Ups:
Post a Followup
|