Farmall & IHC Tractors Discussion Board |
No Steering on my H
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by tony on December 03, 2003 at 12:29:40 from (216.117.82.152):
Gentleman, I need some help! Today I went to haul a load of manure with my H, backed up 3' and the tractor quickly wanted to jackknife. Looked at my front tires (narrow front) and they were cocked all the way to the side. I turned steering wheel but no tire movement at all. This is where I am at. I removed the hood and nose piece. I took off the cover for the sector gear. The worm was unscrewed from the half round gear so I re-threaded it back on. I turned the steering shaft but still no movement at tires. The pivot shaft that goes up to the half round gear does turn. I began jacking up the tractor and the (not sure what this is called) "lower bolster" began coming out of the heavy cast piece. The tires stayed on the ground. If I continue to raise the tractor it looks like this lower part will fall right out. My questions are what happened to cause no steering? What holds the lower part into the casting from just falling out? Does anyone have any pictures of this or diagrams? My books don't show much. I'm going to go back out and have a better look. Thanks in advance!
Follow Ups:
Home
| Forums
Today's Featured Article -
Trenching With a Plow - by Staff. Introduction: This interesting information came from one of the discussion forums here at YT. We thought we should place it up front so it could be read by anyone interested in putting old iron to work. [Editor] I tried something new today, and it worked so well I thought I should post it - in case it might help someone else. I'm running 100 yards of 4" drain pipe from the gutter downspouts of our house to a pond down the hill. This should hel
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|