M burning points

Posted by Wicksfield on May 31, 2006 at 05:23:28 from (66.17.186.2):

I recently converted my M over to 12V negative ground alternator. Using the ignition resistor provided with the kit, my input voltage to the resistor is about 14V and output is about 8V. I changed coils from the original 6V over to a 12V coil after I burned the first set of points thinking that could be the problem. Total, I've burned 3 sets of points with this set-up. 2 sets from TSC, 1 set from NAPA. Changed the condenser with each point set change.

What in the H is the problem!!??

Replies:

• Re: M burning points Hermit 18:00:36 05/31/06 (0)
• Re: M burning points billde 09:13:41 05/31/06 (1)
  • Re: M burning points Wicksfield 10:01:33 05/31/06 (0)
• Re: M burning points Allan In NE 07:26:22 05/31/06 (2)
  • Re: M burning points Wicksfield 08:05:56 05/31/06 (1)
    • Re: M burning points John T 09:31:01 05/31/06 (0)
• Re: M burning points Wicksfield 06:52:50 05/31/06 (2)
  • Re: M burning points Bob M 07:25:19 05/31/06 (1)
    • Re: M burning points Wicksfield 08:22:54 05/31/06 (0)
• Re: M burning points John T 06:22:24 05/31/06 (0)
• Re: M burning points Bob M 05:42:33 05/31/06 (0)
• Re: M burning points 300Randy 05:42:32 05/31/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]