Posted by TX656 on May 10, 2008 at 06:52:33 from (71.48.165.214):
I plumbed the remote back to itself with a 6' line and two quick connects (in an attempt to find out why this tractor will not work consistently with a loader). When I push remote lever forward there is tiny decrease in rpm, hose jumps and pressures up, ALL SEEMS WELL.
When I pull remote lever back to supply pressure to opposite quick connect engine really lugs down, and governor kicks in, NOT CORRECT.
What would cause this? (I get the full 1600 PSI on each coupler when measured with a gauge plumbed to either quick connect.) Have recently replaced old 17 GPM Cessna pump with a new one. Made a WORLD of difference with the steering and the growling noise under my feet is gone.
Can't tell you if the remotes ever worked properly because I didn't have anything to hook them up to until now. They will be used for 605F Vermeer (w/splitter), standard 3x8" lift cylinder, and hopefully the loader.
Loader is completely disconnected from everything, (it was plumbed to the remotes.) Thank you for any experience and assistance. It's a beautiful day in Texas for working on tractors.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
